Bauer Supreme Totalone Mx3 Junior Hockey Elbow Pads Review

• Well-nigh
• Latest Posts

Stephen Hamilton

My name is Stephen Hamilton and I'thousand from the Greater Toronto Expanse.I have been playing hockey since I can remember.I love watching it, learning about it and about chiefly, playing it!I currently play for my high school varsity squad besides as various mens leagues and local teams which allows me to exist on the ice a ton.I likewise work at a hockey shop and sell/fit equipment.I am 6'1 and weigh 170 pounds.I ordinarily use a p92 curve with an 87 flex only honey to attempt new patterns.Feel free to comment any questions you lot may have.

The beginning of the 2016-2017 season was rolling effectually and I rapidly realized that I needed new skates desperately so I picked up a pair of the Bauer Supreme TotalOne MX3 skates.  I didn't really have the intention of buying whatever specific pair, I just knew that I wanted to stick with Bauer which is what I take used previously.  I also decided that it was finally time for me to get a high-end pair of skates which I previously never had.  Before the MX3's, I was in a Bauer Vapour x5.0 skate which was fine and I actually expected to stick with the vapour line.  I wanted to exist sure then I tried all three of Bauer'southward high-end models in each respective line on (Vapour 1X, Supreme MX3 and Nexus 8000) except for the 1s and 1n because the MX3 and 8000 models were a better deal and still a high-cease model with the aforementioned general fit as the newer versions.  I decided I liked the fit of the MX3 the all-time because the 1X's were just uncomfortable and likewise narrow whereas the 8000's felt virtually sloppy and did non wrap my human foot very well.  The MX3 moderate fit blueprint was a dandy medium for my human foot and they felt comfortable so I went with those.  I was really hoping my offset pair of loftier-end skates would be every bit skillful equally people say they are and that much better from the cheaper, lower end models.  I was not disappointed.

Supreme TotalOne MX3 Technology

Just like all other high-end and now footstep-downwards from high-end Bauer skates, the MX3's boast a 3D Curv blended kicking construction which makes upward the quarter-package of the skate (Get-go appeared on the original TotalOne skates).  Bauer states that this applied science gives a player a strong stiff structure as well every bit an extremely lightweight kicking.  They aren't kidding.  The 3D Curv composite in the boot paired with the "ultra lightweight" blended outsole help the skate to weigh in at a mere 820 grams for the size ix.5 model (the size that I have).  The Curv technology is also the best in the business organisation for formability when molding the skates by baking them.  I could certainly notice a departure in the overall experience and fit after I molded them fifty-fifty when just trying them on.  Bauer calls this "AnaformFit applied science" which is also helped by the HydraMax liner which still seems to go along its comfortable class over time as well as continuing to wick away moisture forth with the Class-Fit + insole. I end up swapping for Superfeet insoles considering the Class-fit + I constitute also flimsy.

Another feature for condolement found on high-stop Bauer skates is what they phone call Comfort Border pads which are essentially padding at the top of the skates in the ankle portion.  These are strictly plant on the meridian-of-the-line models for Bauer.  They don't affect performance, nevertheless they felt great when I was turning precipitous on an border and a definite upgrade from previous rigid designs.

Next, a main affair that the MX3's have that is now plant in all Bauer skates is the TUUK Lightspeed Edge holder.  This is a great development considering it allows players to quickly swap out steel in seconds with the new trigger system equally opposed to the old conventional methods.  I take read that this caught on very chop-chop at the pro level because of how fast they demand fresh steel as well as at the recreational level because it saves people the hassle of having to bring their skates into a shop and expect for the swap to exist made.  Now they tin just buy the steel and replace it themselves.  Fifty-fifty I used the function on these skates.  The MX3's come up stock with TUUK Lightspeed Fusion steel which I swapped out for the LS4 steel because the skates needed new blades when I got them and I did then with ease.

These features are all establish in diverse skates on the market simply I will at present become over what differentiates the MX3 skate to most skates on the marketplace.

Injected Stability Lacing System

The showtime thing that stands out for me is the eyelets used on the MX3's.  Originally appearing on the APX2 skates, the Injected Stability Lacing System has shown upward on every unmarried one of Bauer's high-finish models since.  I notice a massive deviation from traditional eyelets and I don't think I will ever become back.  Bauer says that the engineering allows for "increased frontwards flex" which helps with energy transfer.  The reason I like it and then much is because information technology wraps my foot amend than whatsoever other skate I have tried as well equally having a lace-lock organization incorporated into the eyelets for a tighter experience.  It is just subtler than the 1 on the CCM 50K'southward because information technology is actually inside each eyelet.  I did notice some of the stitching at the very bottom of the lacing system about the toe-box seems to have come out a picayune which would be bad if it was a large tear because the eyelets are all one slice and about impossible to repair whereas with conventional eyelets they can exist replaced individually.

three-Flex Natural language

A new feature that was introduced on the MX3's is the three-Flex tongue system.  Instead of having a stationary piece of composite or other material for the base of there tongue, there is actually an interchangeable slice of Curv composite.  This allows the user to cull either "MID", "Potent" or "Ten-STIFF" depending on what they prefer.  Each of the options comes in the box and can be changed equally many times as desired.  They are kind of a pain to modify just considering you have to take the laces almost completely out of the skate which is kind of a hassle considering of the Injected Stability Lacing Organization.  The tongue on these skates was actually fairly short compared to others which I liked considering I put my shin pads over my natural language.  I noticed in the 1S's, they made the tongue a scrap longer while still incorporating the 3-Flex arrangement, which they are now calling "C-Flex Technology".

Free-Flex Tendon Baby-sit

Some other new technology that started on the MX3's is the Free-Flex tendon guard.  Unlike other skates, these actually have a flexible tendon guard that allows for a full motion footstep and assistance with explosiveness by springing back into identify the second the step is complete.  This slice besides has the HydraMax liner incorporated into it for maximum comfort unlike the new Supreme 1S model that is just a piece of molded plastic.  Although the Complimentary-Flex tendon guard on the 1S skates tin can be adjusted for how much flex is desired (C-Flex Technology), I nonetheless call back the MX3 tendon guard design is but as good if not better considering of the padding for comfort too as a meliorate shape then the newer version.

Fit

As Bauer stated, these skates fit anatomically throughout which essentially means they are a consistently fitted experience and size in each part of the boot.  At that place is a medium pocket every bit well equally a moderate heel lock which fits my pes absolutely wonderfully.  Granted, the blueprint of the Supreme line is not for everybody and you must insure that y'all are sized correctly when buying skates.

Where to Buy the MX3's

Since this skate was released in 2014 and has been largely replaced by the new skate in the Supreme line (the 1S), not every shop even so has them in stock.  That being said, nigh stores do still have them in assorted sizes and they can also easily be constitute online.  When the Supreme 1S skate came out in 2016, the MX3'south dropped from the original toll tag of $899.99 CAD and have been getting cheaper than the $999.99 CAD 1S's always since.

In My Opinion…

I believe that these skates are i of the best options when making the jump into the high-end skate market and trying to get used to the new experience of elite level skates.  Information technology did not take long to get used to the Curv composite boot and blistering just made it easier.  The HydraMax liner just made the skate more comfortable than I have ever been used to although I practise propose upgrading to a college-end insole every bit opposed to the stock Form-Fit + which I found as well flimsy.  For someone that is used to a beginner level skate, the three-flex Tongue organisation is a groovy way to ease into the stiffness of the higher-terminate tongues while still leaving room for change.  I never really used the TUUK Lightspeed fusion runners but the LS4's are outstanding.  I can make sharp turns and stops with ease and they also hold their edge longer and are taller than the Fusions were.  I thought I was really going to dislike the Gratis-Flex Tendon baby-sit but information technology turned out to be a peachy feature for mobility.  The feature I like the most has to exist the Injected Stability Lacing Systems considering of how well they wrap my foot as well as how they keep the skates tied tight all game long.  Overall, I felt that these improved my skating confidence and ability.

Specs

Operation: The skates performed better than anything I had ever tried in the past and they keep to do then consistently.

iii-Flex Tongue: I use the "STIFF" tongue insert because I like every bit strong of a tongue as possible just I actually lost the "X-Potent" inserts.

Weight: My size 9.5'south were 820 grams which is up at that place with the lightest.

Size: I have a pair of 9.five's but this changes drastically depending on the person.

Steel: Like I said, I never used the TUUK Fusion's and I have heard that they were just boilerplate just the LS4 upgrade was definitely worth it.

Fit: The Supreme line for Bauer skates seems to work for me with it'due south moderate style and medium design throughout.

Await: These skates look cracking with the well chosen graphics and classic black and yellow supreme look.

Immovability: I accept noticed that the Curv composite has gotten a little nick in the boot and then I put some silicone caulking to make sure it doesn't spread simply it was not an upshot at all, simply me taking precautions.  I also noticed the fabric at the superlative of the natural language has ripped but there is notwithstanding padding underneath and it has not affected anything.

Price: Originally, the MX3's cost $899.99 CAD just since the release of the new 1S, they accept gone down to about $549.99 depending on the store or website which I call back is very reasonable for a pair of meridian-of-the-line skates.

Recommendations: I would suggest this to someone that has a moderate width and overall size in foot as well as someone that is seeking the explosive "1-2-3" first strides.  Different sticks, not every actor should use whatsoever skate they desire.  If this skate does not feel comfortable on your pes, look at the other options that offer different fits.

hendersontherwas.blogspot.com

Source: http://hockeyreviewhq.com/hockey-equipment-reviews/hockey-skate-reviews/bauer-supreme-totalone-mx3-skate-review-the-best-way-to-step-into-high-end-skates/

Share this post